Hello! Welcome to the official website of heshan hongshun lighting co., LTD.

Skills of Installing Lamps

2019-09-12 10:31:05

  1. When installing lamps and lanterns, many troubles can be saved if the control switch is installed. Because if only a master switch and several lights are on and off together, the light and shade can not be selected, and the energy will be wasted. The switch can be installed to select and turn on several lights at any time according to the demand. If there is an aisle at the entrance of a house, it is better to install a switch at the end of the aisle, so that the power supply can be turned off directly after entering the door, without the need to go back to the door and turn off the lights.

  2. The lighting system should be set up to be adjustable, that is, when the light is dim or eye-catching, people will feel more comfortable and comfortable.

  3. The color temperature of the lamp should be in common with the atmosphere of the room, at least similar to the color temperature of other areas of the room. It can install lamps at the top level to reduce the shadows during operation.

  4. Don't just install a single lighting source in the center. In order to improve the lighting in the kitchen, we should install a multi-level lighting system consisting of different lamps and light sources in the kitchen.

  5. The location of the installation is also important. A straight incandescent lamp or fluorescent lamp should be placed in the front of the cabinet. In this way, part of the light announced by the lamp will be projected back to the baffle, then reflected to the operating table, and then to the center of the whole space.

  6. If the space is high enough, transparent or translucent chandeliers can be installed on the ceiling as a light source. At this time, chandeliers can not only provide excellent lighting, but also are good decoration items.

  7. The most important thing of the lamp device is to be strong. You can hold it by hand and feel it.

  8. The bottom cover of the lamp should be close to the ceiling and not shake.

  9. If it is a pendant lamp, there will be a wire extending from the top to the head of the lamp. It should be noted that this wire can not be tightened, it should be loosely wrapped around the tie rod to go down, otherwise the long-term tightening of the wire will be very simple in the future.

  10. Check carefully. No exposed wires are allowed.

  11. In addition, many ceiling lamps have scratch-proof membranes on them. After the device needs to be uncovered, people who have uncovered it know that it is very difficult. In fact, there is a little trick to blow the membranes with a hairdryer, and then uncover it very easily.

  Source: Soft-wire Lamp Manufacturer http://www.hs-hongshun.com/

  1. When installing lamps and lanterns, many troubles can be saved if the control switch is installed. Because if only a master switch and several lights are on and off together, the light and shade can not be selected, and the energy will be wasted. The switch can be installed to select and turn on several lights at any time according to the demand. If there is an aisle at the entrance of a house, it is better to install a switch at the end of the aisle, so that the power supply can be turned off directly after entering the door, without the need to go back to the door and turn off the lights.

  2. The lighting system should be set up to be adjustable, that is, when the light is dim or eye-catching, people will feel more comfortable and comfortable.

  3. The color temperature of the lamp should be in common with the atmosphere of the room, at least similar to the color temperature of other areas of the room. It can install lamps at the top level to reduce the shadows during operation.

  4. Don't just install a single lighting source in the center. In order to improve the lighting in the kitchen, we should install a multi-level lighting system consisting of different lamps and light sources in the kitchen.

  Soft Wire Lamp Manufacturer

  5. The location of the installation is also important. A straight incandescent lamp or fluorescent lamp should be placed in the front of the cabinet. In this way, part of the light announced by the lamp will be projected back to the baffle, then reflected to the operating table, and then to the center of the whole space.

  6. If the space is high enough, transparent or translucent chandeliers can be installed on the ceiling as a light source. At this time, chandeliers can not only provide excellent lighting, but also are good decoration items.

  7. The most important thing of the lamp device is to be strong. You can hold it by hand and feel it.

  8. The bottom cover of the lamp should be close to the ceiling and not shake.

  9. If it is a pendant lamp, there will be a wire extending from the top to the head of the lamp. It should be noted that this wire can not be tightened, it should be loosely wrapped around the tie rod to go down, otherwise the long-term tightening of the wire will be very simple in the future.

  10. Check carefully. No exposed wires are allowed.

  11. In addition, many ceiling lamps have scratch-proof membranes on them. After the device needs to be uncovered, people who have uncovered it know that it is very difficult. In fact, there is a little trick to blow the membranes with a hairdryer, and then uncover it very easily.

  Soft-wire Lamp Manufacturer http://www.hs-hongshun.com/


Avigraph Call About Product